A gutter sags when its supports give way: hangers pull loose, the fascia softens, or the weight of debris, water and ice becomes too much. The fix is usually new or added hangers and a reset slope. Call the number on this page to be connected with a local gutter company in Lakewood.

How to spot a sagging gutter
Stand back from the house and sight along the gutter line against the roof edge. It should look straight, tilting slightly toward downspouts. Dips mid-run, drooping ends or a hand-wide gap all show that supports have failed, and the sooner you spot them the easier the fix. Crooked lines are easy to miss until snow outlines them.
Light-gauge metal
Thin builder-grade aluminum bends more easily than heavier material, especially in long spans. A ladder leaned on the lip, a branch falling onto it or a snow slide can crease it. Once creased, it will not hold a straight line, even with extra hangers added later. Heavier-gauge replacements resist this better.
Much of Lakewood's housing dates to the 1970s, so original spike-and-ferrule hangers and aged fascia boards are common causes of sagging runs.
Rehang, brace or replace
The right fix follows the condition of the metal and the wood behind it.
| Fix | Usually when |
|---|---|
| Add hangers, reset pitch | Metal straight, fascia solid |
| Replace a section | Creased or twisted piece |
| New gutters | Widespread bending or soft wood |
The company decides on site. Ask whether trim work is included.
Check the finished job
A rehung gutter should look straight against the roofline, sit snug against the fascia and carry water to the downspout with no pooling. Ask the crew to demonstrate with water, then check again in the next rain from the yard. Keep the photos from before the repair.
Before you call in Lakewood
Permits for work on Lakewood homes are handled by the Lakewood Public Works Building Division. If the job grows into roofing, fascia framing or structural repair, confirm who pulls the permit before work starts.
On permits, the City of Lakewood notes this: Re-roofing needs a roofing permit before tear-off; small repairs under 100 square feet do not. The city's guide requires metal drip edge at all eaves but does not address gutters.
The ground snow load in the City of Lakewood's building code is 30 psf. Snow sliding off the roof is hard on gutters, so ask about hanger type and spacing.
Expansive clay is common under Front Range homes. Keeping roof water away from the foundation is one of the main jobs gutters and downspouts do here.
The Front Range sees frequent hail from late spring through summer, and soft aluminum gutters dent easily. Photograph damage before anything is replaced.
Companies that take calls here usually also work in Edgewater, Wheat Ridge and Sheridan.
Do not hammer it back
It is tempting to nail a drooping gutter back against the fascia. Nails pull out of soft wood, bend the metal and often leave holes that leak. A proper fix uses the right hangers set into sound wood, so wait for the crew. Temporary fixes tend to make things worse.
Around Lakewood
Calls come in from across Lakewood, including around Belmar, Green Mountain, Bear Creek Lake.
Sagging Gutter Repair questions in Lakewood
Can I fix a sagging gutter myself?
How are repair prices decided?
Do hidden hangers hold better than spikes?
Can a crew work in snowy weather?
More gutter repair services in Lakewood
Sagging Gutter Repair nearby
Helpful guides
Sources
Last updated: