Drip edge is metal at the roof edge that guides water off the shingles and into the gutter instead of behind it. Gutter flashing seals the gaps around it. Call the number on this page to be connected with a local gutter company in Conifer.

Signs the roof edge is leaking behind the gutter
Look for dark stains or peeling paint on the fascia, wet or sagging soffit, and water streaks down siding below the gutter. Shingles that overhang past the trough or sit above it with a gap are also a warning. Any of these suggests water is slipping past the edge.
Freeze-thaw and the roof edge
Water that gets behind the gutter freezes in the gap, expands and lifts metal and trim. Each cycle widens the opening and soaks the board a little more. Front Range winters make small edge flaws grow quickly. Fascia and soffit pay for it first.
Mountain homes see deeper snow and steep roofs, so sliding snow can bend drip edge and tear flashing, and wind-driven water finds every gap in the edge.
Permits, snow and drainage in Conifer
Because Conifer has no city government of its own, permits come from the Jefferson County Building Safety.
On permits, Jefferson County notes this: Re-roofing permits are issued by the county, and the building permit card must be posted where it is visible from the street. The page does not mention gutters.
Snow load matters for gutters here. Hidden hangers spaced closer together hold up better under ice and slush than old spikes do.
Much of the metro sits on clay soils that swell when wet, so downspouts should carry water well away from the foundation.
Summer hailstorms hit this area often, and dents in gutters can be useful evidence when a roof is inspected for storm damage.
Foothill and mountain homes around Conifer get heavier snow and more pine needles in their gutters; wildfire guidance also says to keep gutters clear of dry debris.
Companies that take calls here usually also work in Ken Caryl, Evergreen and Pine.
Roofing overlap
Drip edge sits under and over shingles, so some work involves roofers. A gutter company can add apron and back flashing; installing drip edge across the whole roof edge may need a roofer. Ask who does which part. Clarifying that up front avoids two overlapping quotes.
Timing with other work
Flashing work fits naturally with new gutters, a roof repair or fascia replacement. If any of those are coming, mention them up front so the order of work makes sense and nothing needs to be taken apart twice. A company can tell you the best order.
Ladder safety
Roof edge work happens at the most dangerous height for a fall. Keep ladders clear of power lines, never rest one on a gutter, and don't climb on slick or wet days. Take photos from the ground and let the crew handle the rest. A short call is better than a long fall.
Drip Edge & Gutter Flashing questions in Conifer
Is drip edge a roofer's job or a gutter company's?
Will new gutters fix a flashing problem?
How do I know if shingles overhang the gutter correctly?
Do metal roofs use drip edge too?
More gutter repair services in Conifer
Drip Edge & Gutter Flashing nearby
Helpful guides
Sources
Last updated: