Aluminum is the most common gutter material in Denver. It does not rust, it is light enough to hang on most fascia boards, and it comes in many baked-on colors. Hail can dent it, though. Call the number on this page to be connected with a local gutter company in Denver.

What aluminum gutters are
Most aluminum gutters are formed on site from a coil of flat metal, which is how a run can be seamless from one end of the roof edge to the other. They are usually K-style, a shape that looks like crown molding from the street. Colors are a factory-applied finish, so painting is rarely needed.
Why Denver homes use them
Aluminum does not rust, and Denver has plenty of cold nights and dry days that stress other metals. The Colorado Climate Center notes large seasonal and day-to-night temperature swings along with chinook winds that can raise temperatures 25 to 35 F quickly. Aluminum moves with that heat and cold, and a seamless run has fewer joints to open up.
The weak spot: hail
NOAA's National Severe Storms Laboratory puts Colorado inside the country's hail belt. Thin aluminum dents under big stones. Dents do not always leak, so a dented gutter that still drains may only be a cosmetic issue. Thicker gauge metal resists denting better, and it is worth asking a company which gauge it hangs.
Signs aluminum needs work
- Seams or end caps that drip
- Sections pulling away from the fascia
- Standing water after rain, which points to slope problems
- Bent or crushed sections after a storm
What a visit involves
A local gutter company will measure the linear feet, count corners and outlets, and check the fascia behind the gutter. If the roof is large or has long valleys, ask about 6-inch gutters. This Old House says 6-inch K-style handles about 7,960 square feet of drainage area against about 5,520 for 5-inch.
What it costs
National averages shown on Angi's Denver page put seamless aluminum at about $6 to $20 per linear foot. Angi's Denver data for a typical gutter installation in the city runs from $611 to $1,905 per job. Your price depends on footage, stories, gauge and how many corners the roof has.
Repair or replace
Loose hangers, a failed seam or a few bent feet are usually repairable. Widespread dents, peeling finish or gutters that no longer hold slope across the house usually point to replacement. Denver homes in newer HOA subdivisions may also need color or style approval before the new gutters go up.
Downspouts
Aluminum downspouts should discharge well away from the house. The Colorado Geological Survey says to carry roof runoff at least 10 feet from the building, and Denver's runoff guide says downspouts must be directed away from foundations.
Aluminum Gutters questions from Denver homeowners
Are aluminum gutters good for Denver weather?
Will hail ruin aluminum gutters?
What is the difference between seamless and sectional aluminum?
How much do aluminum gutters cost in Denver?
Related gutter repair services in Denver
Aluminum Gutters in nearby cities and towns
Arapahoe County
Jefferson County
Adams County
Douglas County
Broomfield County
Boulder County
Weld County
Elbert County
Larimer County
Clear Creek County
Gilpin County
Park County
Sources
- Angi: Gutter Replacement Cost in Denver, CO
- Colorado Climate Center - Colorado's Climate
- Severe Weather 101: Hail Basics (NOAA NSSL)
- How to size gutters and downspouts (This Old House)
- Special Publication 11, Information for the Colorado Homeowner (Colorado Geological Survey)
- Homeowner Guide to Runoff (Denver)
Last updated: