Aluminum handles Front Range weather well apart from dents, which hail can cause on any thin metal. Whether a section should be fixed or swapped depends on the damage and the fascia behind it. Call the number on this page to be connected with a local gutter company in Longmont.

Aluminum next to the other metals
Steel resists impact better but can rust if its coating breaks. Copper is beautiful and priced accordingly. Vinyl is inexpensive and turns brittle in cold. Aluminum sits between them: prone to dents, immune to rust, easy to color and stocked by nearly every local crew.
How a seamless install goes
- The crew measures each eave and marks downspout spots.
- Coil stock is formed into continuous lengths on the truck.
- Old gutters come off and the fascia is checked.
- New runs are hung, pitched toward the outlets and sealed at corners.
Two-story houses take longer, because tall ladders slow the pace.
Useful local facts for Longmont
Longmont is under the City of Longmont, and building permits there go through the Longmont Building Inspection Division. Gutter work alone often needs none, but a re-roof usually does, so ask the company which applies to your job.
On permits, the City of Longmont notes this: A permit is required to reroof, except repairs replacing less than 100 square feet of the roof; the guide does not mention gutters.
Wet spring snow and ice sliding off the roof are what bend most gutters in this part of Colorado; ask how far apart the company sets its hangers.
Much of the metro sits on clay soils that swell when wet, so downspouts should carry water well away from the foundation.
Summer hailstorms hit this area often, and dents in gutters can be useful evidence when a roof is inspected for storm damage.
Nearby, the same kind of help is available in Frederick, Niwot and Firestone.
Will a bigger gutter cost more?
Yes, but it may be money well spent. Six-inch aluminum with larger downspouts carries more water than the common five-inch size, which helps on big roofs. On a small, simple roof, the standard size is usually enough. The installer can size it to your roof.
Snow and ice on the run
Wet spring snow is heavy, and it slides off a warm roof in sheets. That load can bend aluminum, pop hangers and tear the front lip. Ice damming adds weight along the eave. Closely spaced hidden hangers and firm fascia keep a run from sagging.
Repair or replace aluminum gutters
- Repair: a leaking corner, a loose hanger, one dented section
- Replace: dents along most of the run, repeated seam leaks, wrong pitch
- Replace: fascia damage so wide the run cannot be re-hung
A local company can look at yours, measure the damage against the whole run, and say which path fits.
More about Longmont
Calls come in from across Longmont, including around U.S. Highway 287 (Main Street), State Highway 119, Downtown Main Street.
Aluminum Gutters questions in Longmont
Are aluminum gutters a good choice in Longmont?
Can I paint aluminum gutters?
Why are my aluminum gutters sagging?
Is it worth upgrading to six-inch aluminum gutters?
More gutter repair services in Longmont
Aluminum Gutters nearby
Helpful guides
Sources
Last updated: