A gutter apron or back flashing bridges the gap between shingles and gutter, and it often fixes leaks that look like a gutter problem. Call the number on this page to be connected with a local gutter company in Longmont.

Signs of missing drip edge
Bare wood at the roof edge, shingles resting directly on the fascia and rot that starts at the top of the board all hint that no metal edge is guiding water away. Older homes often lack it altogether. Check under the first row of shingles from below if you can see it.
Older roofs and re-roofing
Many older roofs were built without drip edge, and re-roofing sometimes skips it too. If the shingles were replaced but the edge was never addressed, the problem may have outlasted the new roof. A short chat with a company can clear this up.
Know this about Longmont homes
Longmont is under the City of Longmont, and building permits there go through the Longmont Building Inspection Division. Gutter work alone often needs none, but a re-roof usually does, so ask the company which applies to your job.
On permits, the City of Longmont notes this: A permit is required to reroof, except repairs replacing less than 100 square feet of the roof; the guide does not mention gutters.
Snow load matters for gutters here. Hidden hangers spaced closer together hold up better under ice and slush than old spikes do.
Expansive clay is common under Front Range homes. Keeping roof water away from the foundation is one of the main jobs gutters and downspouts do here.
Hail is a regular part of summer along the Front Range. Dented gutters and downspouts are often among the first things an adjuster notes after a storm.
Companies that take calls here usually also work in Frederick, Niwot and Firestone.
Color and finish choices
Drip edge and flashing come in several colors and finishes. Matching trim and gutters matters in some HOAs, and thicker metal costs more. A company can describe the options without you committing to anything. Ask what is standard and what costs extra.
What a good result looks like
After the work, water should run off the shingles, over the metal edge and into the gutter, with no gap or exposed wood. Watching the next rain is a simple way to confirm it, and you can tell the company if not. It is a simple test with a clear answer.
Protect the wood meanwhile
If you can't get a repair scheduled right away, keep gutters clear so water has a place to go, and watch for new stains. Wet fascia rots faster each week, so small problems don't wait well. A tarp or sealant is not a long-term answer.
Around Longmont
Calls come in from across Longmont, including around U.S. Highway 287 (Main Street), State Highway 119, Downtown Main Street.
Drip Edge & Gutter Flashing questions in Longmont
Do I need drip edge if my gutters work?
Can caulk fix a gap between the roof and gutter?
Does flashing matter at wall corners?
Is rust on drip edge a problem?
More gutter repair services in Longmont
Drip Edge & Gutter Flashing nearby
Helpful guides
Sources
Last updated: